Electrical Interconnect & Termination Devices

Interconnection and termination devices offer an inexpensive, single step, easy to use method of producing high quality wire splicing, solder crimp and sealing in one operation, strain relieving and coaxial shield terminations. A large range products are available, providing solutions for industrial applications, through to the high performance demands of the Aerospace and Motorsport markets. Temperature capabilities range from -55ºC to +260ºC

Wire to Wire Splicing
We offer many products for wire to wire splicing: SolderSleeve® splicing devices, Soldergrip®, DuraSeal®, and MiniSeal® crimp splices, which are rugged, reliable and easy to install.

Sealed Terminals and Disconnects
DuraSeal® devices are simple and quick to install using a crimp tool and a heat source. They accommodate a wide range of wire sizes and are colour coded. SolderGrip® devices utilise a spiral copper coil that grips and compresses the conductors, allowing the pre-fluxed solder ring to flow to the splicing area.

Wire Terminations to Pins, Posts and Tabs
SolderSleeve® terminators offer easy, one step solutions for wire connections to pins, posts, tabs and mass wire terminations.

Braid / Shield Termination
SolderSleeve® shield grounding terminators provide an environmentally sealed, strain relieving, insulated and encapsulated solder connection for a variety of sizes and temperatures.

Coaxial Cable terminations
Coaxial cable terminators allow reliable, easy terminations in a variety of coaxial cable applications, including printed circuit boards.

Cable to Cable Splicing Kits
Wire splicing and shield continuity using MIniSeal wire crimps and solder/fluxed impregnated copper braid encased in a heat-shrinkable insulation sleeve.

Shielded Connector Contacts
SolderTact® contacts are designed to provide reliable, one-piece solder terminations for circular and rectangular connectors. These controlled soldering contacts help speed installation and reduce installed costs while eliminating the variables associated with hard to handle crimped terminators.

Databus Components
Brief overview of a full product line of data bus products that offers complete system interconnection hardware for all MIL-STD-1553B multiplexing needs.

For further information please see either the PDF links above, or for additional assistance please contact us:
USA Sales: Phone us on +1 (317) 244 6643 or email us at usasales@rayfast.com
UK/Europe Sales: Phone us on +44(0) 1793 439144 or email us at uksales@rayfast.com

Download PDF for overview and Selection Guide Devices - Introduction
Download PDF for this section of catalogue Devices Please note that this is a 2.3MB file.

Devices Introduction image

Product Overview - Wire & Cable, Heat-Shrink Tubing & Moulded Parts

TE Connectivity

Authorised Distributor for TE Connectivity
Raychem Wire, Harness, Protection & Identification Products


	Home About Us Company Profile Company Services Quality BSI Certificate Supplier Resp's Modern Slavery Act COVID-19 Associated Companies Diploma PLC IS-Group Cabletec Rayfast Sommer Krempfast Gremtek Contact Us Contact Details How to find us Line Card News Page Vacancies
Wire & Cable Introduction 44 Wire 55 Wire 99 Wire ASN-E Wire ACT150 Wire ACT260 Wire KP260 Wire PTFE Wire Cheminax Coaxial Cable Custom Designed Cables Specialist Cables Technical Data Data, RF, Video & Micro Wave Cables Tubing Tubing Introduction Tubing Selection Guide Tubing Products A - R ATUM Tubing CGAT Tubing CGPT Tubing CRN Tubing DCPT Tubing DR-25 Tubing DR-25-TW Tubing HTAT Tubing LSTT Tubing RNF-100 Tubing RNF-3000 Tubing RP-4800 Tubing RT-375 Tubing RW-175-E Tubing RW-200-E Tubing (formerly Viton-E®) Tubing Products S - Z SCL Tubing SR Tubing SRFR Tubing STW Tubing TFE Tubing TFER Tubing TW Tubing VERSAFIT Tubing ZH-100 Tubing ZHTM Tubing Protective Sleeving & Edging Introduction Selection Guide HT5000 Heat Shrink Fabric Tubing Expando® PT & PT Plus Braided Sleeve Expando® HR & HR Plus, Wraparound Sleeve Expando® HTNS-L/HO, Wraparound Sleeve Expando® HTNS-LA/HO, Wraparound Sleeve Expando® TCP-VO, Wraparound Sleeve Expando® PPS, Wraparound Sleeve Roundit® 2000 Sleeving Roundit® 2000NX, Sleeving Roundit® 2000FR, Sleeving Roundit® 2000NX EMI Cu/Ni, Sleeving Roundit® 2000V0, Sleeving Roundit® 2000NX HT, Sleeving Textalu 1202, Sleeving Thermotubix® Industrial, Sleeving Thermotubix® Aerospace, Sleeving PTFE Spiral Binding Raybraid EMI/EMC Tubular Screening Rayrim & TPEM Protective Edging Spring-Fast® Protective Edging Moulded Parts & Shapes Introduction Part Numbering & Selection Guide Material Selection Non-lipped Straight Boots, 202A111 to 196 Non-lipped Right Angle Boots, 222A111 to 196 Lipped Straight Boots, 202K111 to 185 Lipped Right Angle Boots, 222K111 to 185 Lipped Straight Boots, Screened 202S121 to 174 Lipped Right Angle Boots, Screened 222S121 to 174 Micro Moulded Boots 202A111-G07 & 222A111-G07 Micro Moulded Boots 204W221 & 224W221 Micro Moulded Boots 203W301-G02 & 223W601 Micro Moulded Boots 204W221-G03 & 224W221-G03 Micro Moulded Boots 204W511-25 & 224W511-25 Micro Moulded Boots 204W511-12 & 224W511-12 Lipped Straight Long Tail Boots, 202D921 to 963 Lipped Right Angle Long Tail Boots 222D921 to 963 T Transitions 301A011 to 048 T Transitions 322A112 to 158 45 Degree Transitions 342A012 to 058 45 Degree Transitions 342A112 to 138 30 Degree Transitions 362A014 to 114 Y Transitions 382A012 to 048 1:3 Transitions 462A011 to 060 1:4 Transitions 562A011 to 067 Bulkhead Feedthrough 207W213 to 256 End Caps Tapes & Adhesives Introduction and Overview Epoxy Thermosets Adhesives Hot Melt Tape S1125 Two part Epoxy RT125 Two Part Epoxy Silicone Tapes ISKT22 Polyimide Tape High Temp Adhesives & Tapes Introduction High Temp Epoxies High Temp Ceramics High Temp Machinable Ceramics, Tapes & Cloths Interconnect & Termination Devices Introduction Wire to Wire Splicing Overview Wire to Wire - SolderSleeve® Wire to Wire - SolderGrip® Wire to Wire - DuraSeal® Crimp Wire to Wire - Cold Applied Crimp* Wire to Wire - MiniSeal® Crimp Terminals & Disconnects Overview Terminals & Disconnects - DuraSeal® Crimp Terminals & Disconnects - SolderGrip® Wire Termination - Pin, Post, Tab Shield Termination - SolderSleeve® Coax Cable Termination - Overview Coax Cable Termination - SolderSleeve® Coax Cable termination - PCB SolderSleeve® Shielded & Coaxial Cable Splices - SolderShield® Shielded Connector Contacts - Soldertact® Databus Components MIL-STD-1553B TE Deutsch Autosport Connectors TE Deutsch Overview AS Micro XtraLITE HE (ASX) 3, 5 " 6 Way Connector AS Micro UltraLITE HE (ASU) Series Connectors - 3 way AS UltraLITE HE (ASU) Series Connectors - 5 way AS MicroLITE HE (ASL) Series Connectors AS Rally Micro (ASR) Series Connectors AS Composite (ASC) Series Connectors AS Mini Series Connectors AS Series Connectors AS Double Density (ASDD) Series Connectors AS Micro HE Hermetic Series Connectors AS Hermetic Fuel Tank Series Connectors AS MicroLITE HE Fuel Immersible Series Connectors AS Heavy Duty (ASHD) Series Connectors Special Contacts and ASDD System 30 Contact AS Filter / Fibre Optics Series Connectors Connectors (Other) Adaptors and Backshells Introduction Definitions & Technical Overview Solid Adaptors (Fixed) Spin Coupling Adaptors Shielded Adaptors Tinel Lock Adaptors BandStrap Adaptors HexaShield EMC Adaptors KTKK Backshells TCFS and TCFR Backshells Switches Introduction Basic Switches Pushbutton Switches Trim & Toggle Switches Rocker Switches Other Types Control & Custom Grips Hall effect switches and grips overview Limit Switches Custom & Speciality Switches Identification Systems Introduction Print Service Marker Sleeve Selection Guide CM-SCE HLX125 Cable Tags D-SCE HT-SCE UV-SCE RPS TMS-CCUV TMS-SCE HX-SCE Raymark A4 SBP Labels WP Labels TTP Continuous Polyester Labels MP Polyester Labels WinTotal® Software T200 Printer & Ribbons TE3112 Printer & Ribbons Cable Management Systems Introduction Nylon Cable Ties - Overview & Materials PLT Series - PanTy® Nylon Cable Ties BT Series - DomeTop® Nylon Cable Ties with Barb MLT Series - Steel Cable Ties MLTC & MLTFC Series - Coated Steel Cable Ties Cable Tie Installation Tools MIL-Spec Cross Reference (MIL-S-23190E) Wiring & Harness Board Accessories Lacing Tapes, Cords & Braiding Yarns - Overview Lacing Tapes, Cords & Braiding Yarns - Specifying Overbraiding Yarn Selection Guide Application Equipment Introduction HL2010E & HL1910E General Purpose Heat Guns CV1981-ST & CV1983-ST Heavy Duty Heat Guns CV1981-ATPID Electronic Thermo Control Heat Gun Reflectors Hot Jet S Compact Heat Gun Crimp Tools Custom Stripmaster® Wire Stripping Tool Ergo Elite Stripmaster® Wire Stripping Tool Coaxial & Ringer Wire Strippers T®-Cutter Wire Cutter tool Product Overviews Product Guide - Overview (PDF) Identification Products - Overview (PDF)	Electrical Interconnect & Termination Devices Interconnection and termination devices offer an inexpensive, single step, easy to use method of producing high quality wire splicing, solder crimp and sealing in one operation, strain relieving and coaxial shield terminations. A large range products are available, providing solutions for industrial applications, through to the high performance demands of the Aerospace and Motorsport markets. Temperature capabilities range from -55ºC to +260ºC Wire to Wire Splicing We offer many products for wire to wire splicing: SolderSleeve® splicing devices, Soldergrip®, DuraSeal®, and MiniSeal® crimp splices, which are rugged, reliable and easy to install. Sealed Terminals and Disconnects DuraSeal® devices are simple and quick to install using a crimp tool and a heat source. They accommodate a wide range of wire sizes and are colour coded. SolderGrip® devices utilise a spiral copper coil that grips and compresses the conductors, allowing the pre-fluxed solder ring to flow to the splicing area. Wire Terminations to Pins, Posts and Tabs SolderSleeve® terminators offer easy, one step solutions for wire connections to pins, posts, tabs and mass wire terminations. Braid / Shield Termination SolderSleeve® shield grounding terminators provide an environmentally sealed, strain relieving, insulated and encapsulated solder connection for a variety of sizes and temperatures. Coaxial Cable terminations Coaxial cable terminators allow reliable, easy terminations in a variety of coaxial cable applications, including printed circuit boards. Cable to Cable Splicing Kits Wire splicing and shield continuity using MIniSeal wire crimps and solder/fluxed impregnated copper braid encased in a heat-shrinkable insulation sleeve. Shielded Connector Contacts SolderTact® contacts are designed to provide reliable, one-piece solder terminations for circular and rectangular connectors. These controlled soldering contacts help speed installation and reduce installed costs while eliminating the variables associated with hard to handle crimped terminators. Databus Components Brief overview of a full product line of data bus products that offers complete system interconnection hardware for all MIL-STD-1553B multiplexing needs. For further information please see either the PDF links above, or for additional assistance please contact us: USA Sales: Phone us on +1 (317) 244 6643 or email us at usasales@rayfast.com UK/Europe Sales: Phone us on +44(0) 1793 439144 or email us at uksales@rayfast.com Download PDF for overview and Selection Guide Devices - Introduction Download PDF for this section of catalogue Devices Please note that this is a 2.3MB file.
	Authorised Distributor for TE Connectivity Raychem Wire, Harness, Protection & Identification Products Terms & Conditions \| GDPR \| Privacy Policy \| Trademarks & Disclaimer \| Sitemap \| Download Adobe